Parts & Accessories

Showing1-15 of 27 items
6395616
Yamaha 703 SIDE MOUNT CONTROL BOX

Yamaha 703 SIDE MOUNT CONTROL BOX

MSRP: $200.00 | Price: $150.00

Barley used, genuine Yamaha Marine Motors Side Mount Control Box, 10 Pin. This is a factory original equipment accessory, not aftermarket. The redesigned 703 mechanical remote offers convenient new features and an updated appearance, while still maintaining the simple functionality that's made it one of Yamaha's bestsellers for years. This is a "Push To Open" Control: it features a key switch with "push to choke" option and 16FT 10-Pin Harness is attached and ready to hook up to your engine. The handle position can also be changed so it can be mounted on either the port side or the starboard side. Will work with all 2-stroke and 4-stroke mechanical (cable) shift Yamaha outboard motors that have 10-pin main engine harnesses and "push to open" throttle. New ergonomic grip for smooth, precise operation New reversible handle for use on right-hand or left-hand installations New rotating grip allows operation of the power trim and tilt switch with the thumb of either hand Updated color scheme complements the rest of the Yamaha rigging line.

Stock #: YAMAHA703
6395609
Monster Bait Cutting Board

Monster Bait Cutting Board

MSRP: $110.00 | Price: $100.00

Monster cutting board is made with Marine grade StarBoard® XL which is a 100% virgin polymer, marine-grade cellular material and has an excellent surface finish and is up to 30% lighter in weight than most other boards and are made with the exclusive K-Stran™ process for superior consistency and flatness. Features: • Unique (closed-cell) cellular marine-grade product • Environmentally stabilized for harsh sun and tough marine environments. • Will not rot, swell, splinter, or delaminate when exposed to humidity or water. • Resists odor, even in wet environments. • Easy to clean and never needs refinishing. • Matte-textured finish on both sides.

Stock #: CUTTINGBOARDBLACK
6395541
Minn Kota MK212PCL Battery Charger

Minn Kota MK212PCL Battery Charger

MSRP: $319.99 | Price: $219.99

NEW in the box: Minn Kota MK212PCL Precision Battery Charger. 2 Banks, 6 AMPS per Bank, 12 AMPS total. Longer run times. Shorter charge times. That's the precision difference that keeps anglers on the water longer and puts more fish in the boat. Now, the next generation of this legendary line of chargers has been optimized for 12 volt lithium (LiFePO4) batteries. Precision chargers feature battery-type selection by bank, which now includes charge curves specially formulated for the high demands of lithium batteries, and can even wake these battery types from standby. Battery Type Selection: Each charging bank can be selected to your specific battery type (Lithium (LiFePO4) AGM or flooded lead acid) to guarantee a safe, protected charge Automatic Temperature Compensation: Precision chargers sense and adjust to ambient temperature fluctuations to ensure a fast, accurate charge Low-Line Voltage Compensation: When outlets don't put out the 120 volts they are supposed to, Precision Chargers compensate to deliver a fast, consistent charge no matter what Battery Equalization: Cleans and protect your battery (flooded lead acid only) every time you plug in. Also activates a more rigorous, complete cleaning at the push of a button Digital Control: Microprocessor-based design delivers a faster, more precise charge every time. Precision chargers can even wake dead 12 volt lithium (LiFePO4) batteries from standby automatically. LED Indicator Lights: Inform of charge stage, maintenance mode status, error notifications and full chargeAutomatic Multi-Stage Charging: Controls the voltage and current your battery gets throughout the charging cycle, ensuring a fast, safe and precise charge Waterproof Construction: All on-board chargers are built to be waterproof, shock-resistant and vibration-resistant 3-Year Warranty: All battery chargers come with a full 3-year replacement warranty Supported Battery Types: 12v AGM, 12v Flooded Lead Acid, 12v Lithium LiFePO4 Power Cord and Battery Leads Length: 6ft each | Product Dimensions | 5.88 in x 3.5 in x 9.88 in | 14.94 cm x 8.89 cm x 25.1 cm | | ------------------ | --------------------------------------------------------- | |

Stock #: 27-1832121
6395539
GEARCASE - Suzuki DF115BTL/DF140BTL

GEARCASE - Suzuki DF115BTL/DF140BTL

Price: $2,500.00

Suzuki DF115BTL & DF140BTL 4-stroke gearcase. Taken off of a NEW motor (2023 +) to install a jet pump. Prop hardware and water pump included. Fits 2021 to current DF115BTL & DF140BTL models (20" shaft). 2 available

Stock #: 50020-99841-YAY
6395538
CMC PT-35 Power Tilt & Trim

CMC PT-35 Power Tilt & Trim

MSRP: $923.00 | Price: $785.00

NEW without box. Features Rated for 35 hp power and smaller motors 5 1/2" Set Back to Enhance Boat Stability and Performance 1/4" 6061 T6 Extruded Aluminum Construction with Stainless Steel Fasteners Accommodates Clamp-on or Bolt-on Motors Without the Need of an Adapter Weighs Only 24 Pounds Specs Power rating: up to 35 hp Set Back: 5 1/2" Trim and tilt: 84° Inside dimension of the motor mounting area: 11" Electric hydraulic actuator rating: 7853 lbs. of thrust Weight: 24 lbs Electric Hydraulic Tilt & Trim You Get Power Tilt & Trim, Better Boat Handling, More Speed, Lower Fuel Consumption and No More Back Strain! Note: The inside dimension of the motor mounting area of the PT-35 is 11 inches. Before ordering, please make sure that the maximum width of the clamp mounting feet and/or mounting bolts of the motor that must fit into this area does not exceed this 11 inch limit. Refer to the transom view drawings. Mounting bolts are not included with the PT-35.

Stock #: 303444
6379185
Mercury Black Max Prop 13 3/4" x 15P

Mercury Black Max Prop 13 3/4" x 15P

MSRP: $258.33 | Price: $175.00

NEW Mercury Black Max aluminum 3 blade propeller. 13 3/4" diameter x 15 pitch. Equipped with fixed rubber hub. Fits: Mercury/Mariner 40hp - 60hp Big Foot Outboards 60hp Maximum 3 Available

Stock #: 48-77342A33
6379184
Quicksilver Diamond 4  Prop 20P Counter Rotation

Quicksilver Diamond 4 Prop 20P Counter Rotation

MSRP: $189.26 | Price: $100.00

NEW Quicksilver 4 blade aluminum prop - COUNTER ROTATION - 14" diameter x 20 pitch LH rotation Fits: Mercury/Mariner 135-300hp Evinrude/Johnson V6/V8 Gearcases Suzuki 150 - 225hp Yamaha 150 - 250hp Mercruiser Alpha/Bravo One Volvo Penta SX OMC Model 800 Cobra Cobra SX King Cobra Sea Drive w4 3/4" gearcase Yamaha 130 - 300 hp stern drives This prop requires a Flo-Torq hub assembly which is sold separately.

Stock #: QA2187X
6379177
Evinrude Aluminum Prop  13.2 x 21P - BRP 0765185

Evinrude Aluminum Prop 13.2 x 21P - BRP 0765185

MSRP: $200.00 | Price: $125.00

* 3 blade propeller * 13.2 in. diameter * 21 in. pitch * 13 spline * Right hand * Cast aluminum * Speed cupped blades for better top end performance * Baked-on corrosion resistant paint protects against galvanic corrosion and in saltwater environments * Fits 40 hp - 130 hp Evinrude E-TEC outboards (excludes 25 in. gearcase models) * Replaces Bombardier Recreational Products 384140, 382766, 389788, 176216, 177140, & 763465

Stock #: 0765185
6379175
Garelick 4 Step Pontoon Ladder

Garelick 4 Step Pontoon Ladder

MSRP: $253.59 | Price: $199.00

Designed for use at side gate or transom. Attaches easily to deck with the included Shur-loc catches. Shur-loc catch brackets allow for permanent or removable mounting. Features 4 comfortable white traction molded poly steps and vinyl sleeves on verticals to protect pontoon. Hooks fold flat for stowage. Durable 1 in. diameter anodized aluminum tube, rated to 250 lbs.

Stock #: 3-15240
6379165
Suzuki DF115A Integrated Tiller Handle - USED

Suzuki DF115A Integrated Tiller Handle - USED

Price: $1,300.00

USED - in good condition. Integrated tiller handle kit for a Suzuki DF115A. The steering dampner is NEW and still in the sealed bag from the factory. Includes tachometer display with check engine, temperature and oil lights. Also equipped with troll mode switch.

Stock #: 63002-90J38-YAY
6378941
Monster 0/33-4-XX-BLK

Monster 0/33-4-XX-BLK

MSRP: $27.00 | Price: $24.00

Double action 0/33 Rod Holder. Bases sold separately. This Rod Holder has two positions and is popular with the drift fisherman, it will hold your rods horizontal to the water for a more precise presentation or elevate them for anchoring. This rod holder can best be used for anchoring and drifting. Rod holder is 1/2 inch-13 available in right or left-hand threads.

Stock #: 033-4-XX-BLK
6378940
Monster 33/45-4-XX-BLK

Monster 33/45-4-XX-BLK

MSRP: $27.00 | Price: $24.00

Double Action 33/45 Rod Holder WITHOUT Base. This is by far our best seller, this rod holder has two positions and can be used for all applications such as anchoring, trolling and drifting. Rod holders offered in 1/2-13 inch Right or Left-hand threads with a 4" stem. Monster Rod holders are built Monster strong to handle the larger hard running freshwater fish, such as catfish and stripers. Designed by a competitive catfish tournament angler. The rod holders are made of 1/2 in. steel covered with a thick plastic coating to protect your rods and are constructed with an extra large rod butt rest for easy rod removal when the rod is loaded.

Stock #: 3345-4-XX-BLK
Showing1-15 of 27 items

Please enter your contact information and one of our representatives will get back to you with more information.